首页>经验心得>failed to process outbound traffic错误提示新路由3(Newifi D2)老毛子Padavan打开V2RAY
2019
08-10

failed to process outbound traffic错误提示新路由3(Newifi D2)老毛子Padavan打开V2RAY

路由器刷机交流Q群

新路由3刷的 【3.4.3.9-099_9-8-4】版本的老毛子固件,并开了 V2RAY 代理服务,也能正常扶墙   但日志里一直提示错误  并循环出现。

V2RAY客户端设置方法

错误提示类似下面这样

failed to process outbound traffic > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination

客户端错误日志显示为:

2018/11/02 16:13:16 [Warning] [245238840] v2ray.com/core/app/proxyman/outbound: failed to process outbound traffic > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [dial tcp IP地址和端口: connectex: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. dial tcp IP地址和端口: operation was canceled] > v2ray.com/core/common/retry: all retry attempts failed

2018/11/02 16:13:19 [Warning] [1556798153] v2ray.com/core/app/proxyman/outbound: failed to process outbound traffic > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [dial tcp IP地址和端口: connectex: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. dial tcp ip地址和端口: operation was canceled] > v2ray.com/core/common/retry: all retry attempts failed

经过网上搜索和一点点瞎摸索,发现是因为防火墙的问题。

请检查服务器端系统是否有防火墙(如 Centos 的 firewall),或者端口号等配置填写是否正确。

查看是否V2RAY的配置设置错误了,可以使用下面的v2ray配置文件生成器

生成 v2ray 配置文件的信息,待会要用,通过以下地址生成服务端和客户端的配置文件,参数如图所示
https://intmainreturn0.com/v2ray-config-gen/

v2ray配置文件生成器

免费支持本站

支付宝打赏支付宝打赏微信打赏微信打赏

本文》有 0 条评论

留下一个回复 (您的评论需要经过审核才能显示)