老毛子固件风骚网络状态指示灯
【袋鼠】LED灯控制，开机红灯，动态监测，联网绿灯，绿灯根据网速闪烁，断网红灯
老毛子固件修改网络状态指示灯颜色设置
1、自定义设置---网络监测---监测模式---持续监测
2、在最底下点开在网络访问状态改变时运行脚本
3、在最底下加入以下代码
4、加入以下代码：
if [ $1 == "0" ] ; then # 网络不通 mtk_gpio -d 9 1 mtk_gpio -d 9 0 mtk_gpio -d 9 1 logger -t "【网络检测】" "网络已断开，红灯！" else # 网络通 mtk_gpio -d 9 0 mtk_gpio -d 9 1 mtk_gpio -d 9 0 logger -t "【网络检测】" "网络已连接，绿灯！" fi
或者直接复制粘贴整段代码，代码有改动：
#!/bin/sh #/etc/storage/inet_state_script.sh ### Custom user script ### Called on Internet status changed ### $1 - Internet status (0/1) ### $2 - elapsed time (s) from previous state #copyright by hiboy logger -t "【网络检测】" "互联网状态:$1, 经过时间:$2s." # 【自动切换中继信号】功能 需要到【无线网络 - 无线桥接】页面配置 . /etc/storage/ap_script.sh baidu='http://gb.corp.163.com/gb/images/spacer.gif' aptimes=$1 if [ $((aptimes)) -gt "9" ] ; then mtk_gpio -d 9 1 mtk_gpio -d 9 0 mtk_gpio -d 9 1 logger -t "【网络检测】" "网络已断开，红灯！" logger -t "【连接 AP】" "$1秒后, 自动搜寻 ap" sleep $1 else logger -t "【连接 AP】" "10秒后, 自动搜寻 ap" sleep 10 fi cat /tmp/ap2g5g.txt | grep -v '^#' | grep -v "^$" > /tmp/ap2g5g if [ ! -f /tmp/apc.lock ] && [ "$1" != "1" ] && [ -s /tmp/ap2g5g ] ; then touch /tmp/apc.lock a2=`iwconfig apcli0 | awk -F'"' '/ESSID/ {print $2}'` a5=`iwconfig apclii0 | awk -F'"' '/ESSID/ {print $2}'` [ "$a2" = "" -a "$a5" = "" ] && ap=1 || ap=0 if [ "$ap" = "1" ] || [ "$2" = "t" ] && [ -f /tmp/apc.lock ] ; then #搜寻开始/tmp/ap2g5g while read line do c_line=`echo $line | grep -v '^#' | grep -v "^$"` if [ ! -z "$c_line" ] ; then apc=$line radio=$(echo $apc | cut -d $fenge -f1) # ApCli 2.4Ghz if [ "$radio" = "2" ] ; then rtwlt_mode_x=`nvram get rt_mode_x` else rtwlt_mode_x=`nvram get wl_mode_x` fi # [ "$rtwlt_mode_x" = "3" ] || [ "$rtwlt_mode_x" = "4" ] && rtwlt_mode_x=$(echo $apc | cut -d $fenge -f2) rtwlt_sta_wisp=$(echo $apc | cut -d $fenge -f3) rtwlt_sta_ssid=$(echo $apc | cut -d $fenge -f4) rtwlt_sta_wpa_psk=$(echo $apc | cut -d $fenge -f5) rtwlt_sta_bssid=$(echo $apc | cut -d $fenge -f6 | tr 'A-Z' 'a-z') if [ "$radio" = "2" ] ; then ap=`iwconfig | grep 'apcli0' | grep ESSID:"$rtwlt_sta_ssid" | wc -l` if [ "$ap" = "0" ] ; then ap=`iwconfig |sed -n '/apcli0/,/Rate/{/apcli0/n;/Rate/b;p}' | grep $rtwlt_sta_bssid | tr 'A-Z' 'a-z' | wc -l` fi else ap=`iwconfig | grep 'apclii0' | grep ESSID:"$rtwlt_sta_ssid" | wc -l` if [ "$ap" = "0" ] ; then ap=`iwconfig |sed -n '/apclii0/,/Rate/{/apclii0/n;/Rate/b;p}' | grep $rtwlt_sta_bssid | tr 'A-Z' 'a-z' | wc -l` fi fi if [ "$ap" = "1" ] ; then logger -t "【连接 AP】" "当前是 $rtwlt_sta_ssid, 停止搜寻" rm -f /tmp/apc.lock if [ $((aptime)) -ge "9" ] ; then /etc/storage/inet_state_script.sh $aptime "t" & sleep 2 logger -t "【连接 AP】" "直到连上最优先信号 $(echo $(grep -v '^#' /tmp/ap2g5g | grep -v "^$" | head -1) | cut -d $fenge -f4)" fi exit else logger -t "【连接 AP】" "自动搜寻 $rtwlt_sta_ssid" fi if [ "$radio" = "2" ] ; then # ApCli 2.4Ghz iwpriv apcli0 set SiteSurvey=1 if [ ! -z "$rtwlt_sta_bssid" ] ; then logger -t "【连接 AP】" "自动搜寻 $rtwlt_sta_ssid:$rtwlt_sta_bssid" site_survey=$(iwpriv apcli0 get_site_survey | sed -n "/$rtwlt_sta_bssid/p" | tr 'A-Z' 'a-z') else site_survey=$(iwpriv apcli0 get_site_survey | sed -n "/$rtwlt_sta_ssid/p" | tr 'A-Z' 'a-z') fi else iwpriv apclii0 set SiteSurvey=1 if [ ! -z "$rtwlt_sta_bssid" ] ; then logger -t "【连接 AP】" "自动搜寻 $rtwlt_sta_ssid:$rtwlt_sta_bssid" site_survey=$(iwpriv apclii0 get_site_survey | sed -n "/$rtwlt_sta_bssid/p" | tr 'A-Z' 'a-z') else site_survey=$(iwpriv apclii0 get_site_survey | sed -n "/$rtwlt_sta_ssid/p" | tr 'A-Z' 'a-z') fi fi if [ -z "$site_survey" ] ; then logger -t "【连接 AP】" "没找到 $rtwlt_sta_ssid, 如果含中文请填写正确的MAC地址" ap3=1 fi if [ ! -z "$site_survey" ] ; then Ch=${site_survey:0:4} SSID=${site_survey:4:33} BSSID=${site_survey:37:20} Security=${site_survey:57:23} Signal=${site_survey:80:9} WMode=${site_survey:89:7} ap3=0 fi if [ "$apblack" = "1" ] ; then apblacktxt=$(grep "【SSID:$rtwlt_sta_bssid" /tmp/apblack.txt) if [ ! -z $apblacktxt ] ; then logger -t "【连接 AP】" "当前是黑名单 $rtwlt_sta_ssid, 跳过黑名单继续搜寻" ap3=1 else apblacktxt=$(grep "【SSID:$rtwlt_sta_ssid" /tmp/apblack.txt) if [ ! -z $apblacktxt ] ; then logger -t "【连接 AP】" "当前是黑名单 $rtwlt_sta_ssid, 跳过黑名单继续搜寻" ap3=1 fi fi fi if [ "$ap3" != "1" ] ; then if [ "$radio" = "2" ] ; then nvram set rt_channel=$Ch iwpriv apcli0 set Channel=$Ch else nvram set wl_channel=$Ch iwpriv apclii0 set Channel=$Ch fi if [[ $(expr $Security : ".*none*") -gt "1" ]] ; then rtwlt_sta_auth_mode="open" rtwlt_sta_wpa_mode="0" fi if [[ $(expr $Security : ".*1psk*") -gt "1" ]] ; then rtwlt_sta_auth_mode="psk" rtwlt_sta_wpa_mode="1" fi if [[ $(expr $Security : ".*2psk*") -gt "1" ]] ; then rtwlt_sta_auth_mode="psk" rtwlt_sta_wpa_mode="2" fi if [[ $(expr $Security : ".*wpapsk*") -gt "1" ]] ; then rtwlt_sta_auth_mode="psk" rtwlt_sta_wpa_mode="1" fi if [[ $(expr $Security : ".*tkip*") -gt "1" ]] ; then rtwlt_sta_crypto="tkip" fi if [[ $(expr $Security : ".*aes*") -gt "1" ]] ; then rtwlt_sta_crypto="aes" fi if [ "$radio" = "2" ] ; then nvram set rt_mode_x=$rtwlt_mode_x nvram set rt_sta_wisp=$rtwlt_sta_wisp nvram set rt_sta_ssid=$rtwlt_sta_ssid nvram set rt_sta_auth_mode=$rtwlt_sta_auth_mode nvram set rt_sta_wpa_mode=$rtwlt_sta_wpa_mode nvram set rt_sta_crypto=$rtwlt_sta_crypto nvram set rt_sta_wpa_psk=$rtwlt_sta_wpa_psk #强制20MHZ nvram set rt_HT_BW=0 else nvram set wl_mode_x=$rtwlt_mode_x nvram set wl_sta_wisp=$rtwlt_sta_wisp nvram set wl_sta_ssid=$rtwlt_sta_ssid nvram set wl_sta_auth_mode=$rtwlt_sta_auth_mode nvram set wl_sta_wpa_mode=$rtwlt_sta_wpa_mode nvram set wl_sta_crypto=$rtwlt_sta_crypto nvram set wl_sta_wpa_psk=$rtwlt_sta_wpa_psk fi logger -t "【连接 AP】" "$rtwlt_mode_x $rtwlt_sta_wisp $rtwlt_sta_ssid $rtwlt_sta_auth_mode $rtwlt_sta_wpa_mode $rtwlt_sta_crypto $rtwlt_sta_wpa_psk" nvram commit #restart_wan #sleep 10 radio2_restart #sleep 4 #if [ "$radio" = "2" ] ; then #iwpriv apcli0 set ApCliEnable=0 #iwpriv apcli0 set ApCliAutoConnect=1 #else #iwpriv apclii0 set ApCliEnable=0 #iwpriv apclii0 set ApCliAutoConnect=1 #fi sleep 15 logger -t "【连接 AP】" "【Ch:$Ch】【SSID:$SSID】【BSSID:$BSSID】" logger -t "【★连接 AP】" "【Security:$Security】【Signal(%):$Signal】【WMode:$WMode】" if [ "$radio" = "2" ] ; then ap=`iwconfig | grep 'apcli0' | grep 'ESSID:""' | wc -l` else ap=`iwconfig | grep 'apclii0' | grep 'ESSID:""' | wc -l` fi if [ "$ap" = "0" ] && [ "$apauto2" = "1" ] ; then ping_text=`ping -4 114.114.114.114 -c 1 -w 2 -q` ping_time=`echo $ping_text | awk -F '/' '{print $4}'| awk -F '.' '{print $1}'` ping_loss=`echo $ping_text | awk -F ', ' '{print $3}' | awk '{print $1}'` if [ ! -z "$ping_time" ] ; then echo "ping：$ping_time ms 丢包率：$ping_loss" else echo "ping：失效" fi if [ ! -z "$ping_time" ] ; then logger -t "【★连接 AP】" "$ap 已连接上 $rtwlt_sta_ssid, 成功联网" # 网络通 mtk_gpio -d 9 0 mtk_gpio -d 9 1 mtk_gpio -d 9 0 logger -t "【网络检测】" "网络已连接，绿灯！" ap=0 else ap=1 logger -t "【连接 AP】" "$ap 已连接上 $rtwlt_sta_ssid, 但未联网, 跳过继续搜寻" fi fi if [ "$ap" = "1" ] ; then logger -t "【连接 AP】" "$ap 无法连接 $rtwlt_sta_ssid" else logger -t "【连接 AP】" "$ap 已连接上 $rtwlt_sta_ssid" if [ "$apblack" = "1" ] ; then ping_text=`ping -4 114.114.114.114 -c 1 -w 2 -q` ping_time=`echo $ping_text | awk -F '/' '{print $4}'| awk -F '.' '{print $1}'` ping_loss=`echo $ping_text | awk -F ', ' '{print $3}' | awk '{print $1}'` if [ ! -z "$ping_time" ] ; then echo "ping：$ping_time ms 丢包率：$ping_loss" else echo "ping：失效" fi if [ ! -z "$ping_time" ] ; then echo "online" else apblacktxt="$ap AP不联网列入黑名单:【Ch:$Ch】【SSID:$SSID】【BSSID:$BSSID】【Security:$Security】【Signal(%):$Signal】【WMode:$WMode】" logger -t "【连接 AP】" "$apblacktxt" echo $apblacktxt >> /tmp/apblack.txt rm -f /tmp/apc.lock /etc/storage/inet_state_script.sh 0 "t" & sleep 2 logger -t "【连接 AP】" "跳过黑名单继续搜寻, 直到连上最优先信号 $(echo $(grep -v '^#' /tmp/ap2g5g | grep -v "^$" | head -1) | cut -d $fenge -f4)" exit fi fi if [ "$rtwlt_sta_ssid" = $(echo $(grep -v '^#' /tmp/ap2g5g | grep -v "^$" | head -1) | cut -d $fenge -f4) ] ; then logger -t "【连接 AP】" "当前是 $rtwlt_sta_ssid, 停止搜寻" rm -f /tmp/apc.lock logger -t "【连接 AP】" "当前连上最优先信号 $rtwlt_sta_ssid" logger -t "【★】" "【信号强度】【Signal(%):$Signal】" # 网络通 mtk_gpio -d 9 0 mtk_gpio -d 9 1 mtk_gpio -d 9 0 logger -t "【网络检测】" "网络已连接，绿灯！" exit else rm -f /tmp/apc.lock if [ $((aptime)) -ge "9" ] ; then /etc/storage/inet_state_script.sh $aptime "t" & sleep 2 logger -t "【连接 AP】" "直到连上最优先信号 $(echo $(grep -v '^#' /tmp/ap2g5g | grep -v "^$" | head -1) | cut -d $fenge -f4)" mtk_gpio -d 9 1 mtk_gpio -d 9 0 mtk_gpio -d 9 1 logger -t "【网络检测】" "网络已断开，红灯！" fi exit fi fi fi sleep 5 fi a2=`iwconfig apcli0 | awk -F'"' '/ESSID/ {print $2}'` a5=`iwconfig apclii0 | awk -F'"' '/ESSID/ {print $2}'` [ "$a2" = "" -a "$a5" = "" ] && ap=1 || ap=0 sleep 2 done < /tmp/ap2g5g sleep 60 rm -f /tmp/apc.lock if [ "$ap" = "1" ] || [ "$2" = "t" ] && [ -f /tmp/apc.lock ] ; then #搜寻开始/tmp/ap2g5g /etc/storage/inet_state_script.sh 0 "t" & sleep 2 logger -t "【连接 AP】" "继续搜寻" exit fi sleep 1 fi rm -f /tmp/apc.lock sleep 1 fi killall sh_apauto.sh if [ -s /tmp/ap2g5g ] ; then /tmp/sh_apauto.sh & else echo "" > /tmp/apauto.lock fi logger -t "【连接 AP】" "脚本完成"
荒野无灯Padavan固件修改LED颜色脚本
#!/bin/sh echo --- WatchDog --- mtk_gpio -w 8 0 & mtk_gpio -d 11 0 & mtk_gpio -w 10 1 ping -c 1 119.29.29.29 >/dev/null if [ $? -eq 0 ] then echo "WAN Online !" echo --- Exit --- mtk_gpio -w 8 0 & mtk_gpio -d 11 0 & mtk_gpio -w 10 0 else echo "WAN Offline !" mtk_gpio -w 8 1 & mtk_gpio -d 11 1 & mtk_gpio -w 10 1 fi
将以上代码保存为led.sh后缀的文件，然后放在/etc/storage/中并设置文件权限755，之后在Crontab中添加一条
*/1 * * * * /etc/storage/led.sh
即可。联网蓝灯，断网红黄同亮。
如果您通过本站解决了一些问题，并希望本站能够很好的发展下去，动动手指即可帮助我们。
如无特殊说明，解压密码均为：aisoa.cn
您可能感兴趣的文章
- Padavan固件设置无线转有线,Padavan中继桥接自动修改信道脚本使用方法
- 手机共享网络给Padavan老毛子USB调制解调器设置,Padavan老毛子USB调制解调器
- 华硕Padavan老毛子梅林OpenWrt固件创建SWAP虚拟内存后修改扩展SWAP虚拟内存
- 梅林固件开启swap虚拟内存梅林/Padavan开启设置swap虚拟内存
- 华硕Padavan老毛子固件一键开启swap虚拟内存Padavan/OpenWrt开启swap虚拟内存
- 本文固定链接:https://aisoa.cn/post-2985.html
- 转载请注明:于爱搜路由发表
赏
支付宝打赏
微信打赏
支付宝打赏
微信打赏